[winswitch] different ssh server port

Wed Jul 17 17:52:14 BST 2013

Hello, i use these plink 
(https://www.dropbox.com/s/uxhtajq44wumd53/plink.exe) because have the 
same trouble, and these file work good for me.

El 17/07/2013 10:45, Roberto Hashioka escribió:
> Hi Antoine,
>
> I tried plink, but I got a message error saying that I don't have dll
> called MSVCR100.dll.
>
> Roberto
>
>
> On Wed, Jul 17, 2013 at 12:27 AM, Antoine Martin <antoine at nagafix.co.uk>wrote:
>
>> On 17/07/13 13:26, Roberto Hashioka wrote:
>>> Ohh sorry for the wrong e-mail again. Ok. How is the command to use the
>>> putty's plink?
>> Apparently, the same:
>> http://linux.die.net/man/1/plink
>>
>> You may also be able to use the USERNAME@ syntax, ie:
>> xpra --ssh="plink -P PORT" ssh:USERNAME at HOST:DISPLAYNO
>>
>> Antoine
>>
>>>
>>> On Tue, Jul 16, 2013 at 11:19 PM, Antoine Martin <antoine at nagafix.co.uk
>>> wrote:
>>>
>>>>   Please always CC the list. Do not email me directly.
>>>>
>>>> On 17/07/13 13:09, Roberto Hashioka wrote:
>>>>
>>>> Hi Antoine,
>>>>
>>>>   The user exists and the connection is up! I'm able to connect from my
>>>> Mac OS X, but from windows I get that error:
>>>>
>>>>   C:\Program Files (x86)\Xpra>ping 192.168.56.102
>>>>
>>>>   Pinging 192.168.56.102 with 32 bytes of data:
>>>> Reply from 192.168.56.102: bytes=32 time<1ms TTL=64
>>>> Reply from 192.168.56.102: bytes=32 time<1ms TTL=64
>>>>
>>>>   Ping statistics for 192.168.56.102:
>>>>      Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
>>>> Approximate round trip times in milli-seconds:
>>>>      Minimum = 0ms, Maximum = 0ms, Average = 0ms
>>>> Control-C
>>>> ^C
>>>> C:\Program Files (x86)\Xpra>Xpra_cmd.exe --ssh="ssh -p 49154"
>>>> --enable-sharing a
>>>> ttach ssh:docker at 192.168.56.102:10
>>>> xpra client version 0.9.7
>>>> connection failed: Error running ssh program '['ssh', '-p', '49154',
>> '-l',
>>>> 'dock
>>>> er', '-T', '192.168.56.102', '.xpra/run-xpra', '_proxy', ':10']': [Error
>>>> 2] The
>>>> system cannot find the file specified
>>>>
>>>>   C:\Program Files (x86)\Xpra>
>>>>
>>>> If you are connecting from windows, then "ssh.exe" won't exist unless
>> you
>>>> have cygwin installed and on your PATH, you have to use putty's
>> plink.exe
>>>> (which is bundled in the installer).
>>>> The exact command line for plink may well be different too.
>>>>
>>>> Antoine
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, Jul 16, 2013 at 7:54 PM, Antoine Martin <antoine at nagafix.co.uk
>>> wrote:
>>>>>   On 17/07/13 03:14, Roberto Hashioka wrote:
>>>>>
>>>>> Hi Antoine,
>>>>>
>>>>>   Thanks, for your help! Now it's working on Linux and on Mac. But on
>>>>> windows I'm getting this message error:
>>>>>   C:\Program Files (x86)\Xpra>Xpra_cmd.exe --ssh="ssh -p 49154"
>>>>> --enable-sharing attach ssh:docker at 192.168.56.102:10
>>>>> xpra client version 0.9.7
>>>>> connection failed: Error running ssh program '['ssh', '-p', '49154',
>>>>> '-l', 'docker', '-T', '192.168.56.102', '.xpra/run-xpra', '_proxy',
>>>>> ':10']': [Error 2] The system cannot find the file specified
>>>>>
>>>>>   What am I doing wrong?
>>>>>
>>>>> Your user "docker" does not have an xpra server running.
>>>>> To verify:
>>>>> * login via ssh: ssh -p 49154 -l docker 192.168.56.102
>>>>> * look for the session: xpra list
>>>>>
>>>>> I've added this error to the FAQ:
>>>>> http://xpra.org/trac/wiki/FAQ
>>>>>
>>>>>
>>>>> Antoine
>>>>>
>>>>>
>>>>>
>>>>>   Thanks,
>>>>> Roberto
>>>>>
>>>>>
>>>>> On Tue, Jul 16, 2013 at 1:49 AM, Antoine Martin <antoine at nagafix.co.uk
>>> wrote:
>>>>>>   On 16/07/13 15:41, Roberto Hashioka wrote:
>>>>>>
>>>>>> Hi Antoine,
>>>>>>
>>>>>>   I have downloaded the Xpra.app for Mac. I didn't know that app.
>>>>>> However, I need to access the host via ssh and the port is not 22.
>> It's
>>>>>> 49153. How can I change it from the Xpra.app interface!?
>>>>>>
>>>>>>   You cannot, but you can do it from the command line (see "ssh"
>> switch),
>>>>>> for details:
>>>>>> man xpra (on *nix)
>>>>>> or
>>>>>> ./Xpra.app/Contents/Helpers/Xpra -h
>>>>>>
>>>>>> So, in your case:
>>>>>> xpra --ssh="ssh -p 49153" ...
>>>>>>
>>>>>> Antoine
>>>>>>
>>>>>>
>>>>>>
>>>>>>   Thanks,
>>>>>> Roberto
>>>>>>
>>>>>>
>>>>>> On Tue, Jul 16, 2013 at 1:15 AM, Antoine Martin <
>> antoine at nagafix.co.uk>wrote:
>>>>>>>>   6174 ?        S      0:02 /usr/bin/python /usr/bin/xpra start :0
>>>>>>>> --enable-sharing
>>>>>>>>
>>>>>>>   You should not be using such a low display number (":0") as this
>> leads
>>>>>>> to confusion.
>>>>>>> (the server should have warned you about this - see the log file)
>>>>>>>> I'm using ssh forwarding to pipe the connection, because the xpra
>>>>>>>> installation for mac is very complicated!
>>>>>>>   How is the installation complicated? (hint: there is no installation
>>>>>>> required: the DMG contains everything you need to run xpra)
>>>>>>>
>>>>>>>>  From Mac (ssh forwarding):
>>>>>>> I guess that what you are saying is that you first "ssh -X" (or "ssh
>>>>>>> -Y") to the server before launching xpra.
>>>>>>> Don't do that. Running xpra over ssh X11 forwarding will add more
>>>>>>> problems than it is worth.
>>>>>>>> docker at 9b5c0b4b7e54:~$ /usr/bin/xpra --version
>>>>>>> You forgot "--enable-sharing" on both your clients.
>>>>>>>
>>>>>>> Antoine
>>>>>>>
>>>>>>
>>> _______________________________________________
>>> shifter-users mailing list
>>> shifter-users at lists.devloop.org.uk
>>> http://lists.devloop.org.uk/mailman/listinfo/shifter-users
>> _______________________________________________
>> shifter-users mailing list
>> shifter-users at lists.devloop.org.uk
>> http://lists.devloop.org.uk/mailman/listinfo/shifter-users
>>
> _______________________________________________
> shifter-users mailing list
> shifter-users at lists.devloop.org.uk
> http://lists.devloop.org.uk/mailman/listinfo/shifter-users
>